In Settings, you can configure your AirID. Use the control element to select and confirm the settings.
|Select this category to configure security related settings|
Use this setting to configure the distance sensor for the autolock. An active Bluetooth connection to the host device is required to set the distance sensor.
The automatic lock depends on the host device and its operating system and must be activated separetely, if required.
You can use pressetings or set the distance manually.
Following pressetings are available:
If the manual setting is selected, the curent RSSI value is shown in the display. Slowly walk around in the area you want your device to remain unlocked. Press the control element at the preferred distance to confirm the coverage area and activate the Distance Sensor function.
Please note that the measured distance may vary depending on the environment/line of sight. To reduce interference and avoid unintended disconnects, we recommend for manual setting a distance of min. three meters.
Also see section: Setup: AirID Autolock Distance
Randomizes the Bluetooth Mac Address which is used for Bluetooth advertising. This is a security feature of AirID and focuses on device anonymization.
Choose the bluetooth advertising mode between:
|FIDO User Presence|
Typically, a user interaction on your AirID is required in order to confirm a FIDO registration or login. When AirID asks for a user presence, a button on your AirID must be pressed.
With this setting you can choose if you want to press the button for the FIDO User Presence on your own or let the AirID handle it for you automatically.
Use at your own risk! We suggest using this feature only with a set FIDO pin
|FIDO User Signal|
Activate or deactivate the acoustic feedback of the AirID.
With this setting you can manage your AirID Bluetooth connections to your host systems:
None: If no device is selected, a BLE connection to any of the surrounding devices is possible
New: Select this option to connect AirID to a new device, if already connected devices are nearby. All other devices already paired with your AirID will be ignored.
'Device Name': If your AirID is already paired with one or more devices, you can choose the device name to select which device the AirID should preferably be connected to in the future. All other devices will be ignored.
|Select Back to return to the Setting menu.|
Select this category to reset either specific or all settings of your AirID.
Be careful - deleted settings, pairings or keys cannot be restored!
This setting resets the AirID to factory settings. All saved pairing information and keys are also deleted.
To make the factory reset, you have to confirm the query twice with 'yes'.
|With this reset, only the configured settings will be reset to default values|
This setting deletes the saved pairing information and the keys. This is recommended when passing AirID to third parties. You have the option to delete all keys or only the keys for a specific device. After the removal, a new pairing is necessary to re-established a connection.
|Reset LTK Keys|
|This setting deletes the saved LTK keys. You have the option to delete all keys or only the keys for a specific device.|
|With this reset, all FIDO keys will be deleted|
|Select Back to return to the Setting menu.|
|BLE Night Mode|
|Choose whether or not to enable Bluetooth LE night mode. The night mode deactivate Bluetooth advertising during the night to save power.|
Select the default mode for your AirID when connected to the PC via USB:
FIDO: In this USB mode, FIDO authentication is available via Bluetooth and USB when the AirID is connected to a PC via USB. Also the battery will be charged. The card reader functionality is still available via Bluetooth and can be used in parallel.
CARD: AirID automatically connects as USB Card Reader when it gets connected to the PC via USB. Also the battery will be charged. The FIDO functionality is still available via Bluetooth and can be used in parallel
Charge only: With this setting, only the battery will be charged.
Use this setting to update the AirID FIDO firmware manually. An USB connection to your Windows PC or Mac is required.
For detailed information see section: Firmware Update
We highly recommend you to activate the auto update service so that your AirID is always running the latest firmware. This enables you to benefit from the latest features and security-relevant updates.
|Select Back to return to the main menu.|