1. Use the control element of the AirID to navigate to Settings → Update Firmware → Confirm: Yes
  2. The AirID should display: "Send update or unpower to exit"
    With a Windows PC
  3. Connect your AirID with the USB-cable to a Windows computer or Mac.
  4. Open the folder with the extracted firmware and run the "winusb-flash-device.exe" file
  5. once the AirID restarts, the update is finished
    With a MacOS
  6. Open the folder with the firmware and run the "flash-airid.command" file
  7. After a successful update the AirID will reboot automatically and can be used as usual
  8. once the AirID restarts, the update is finished


Firmware older than 1.3.1
  1. Use the control element of the AirID to navigate to Settings → Update Firmware → Confirm: Yes
  2. The AirID should display: "Send update or unpower to exit"
    With a Windows PC
  3. Connect your AirID with the USB-cable to a Windows computer or Mac.
  4. Open the folder with the extracted firmware and run the "flash_gecko.bat" file
  5. once the AirID restarts, the update is finished
    With a MacOS
  6. Open the folder with the firmware and run the "flash-gecko.command" file
  7. After a successful update the AirID will reboot automatically and can be used as usual
  8. once the AirID restarts, the update is finished


If the update fails, the update process is intrerrupted or the AirID doesn't start anymore, go to step 1 and repeat the process.

  • No labels